An FDA-cleared, biocompatible, and photocurable material intended for printing try-in denture models the dentist can use to evaluate cases prior to final dentures. Comes in only one available shade, similar to that of most teeth.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: 1000 cps and 2000 cps
Density: 1.05 Gm./cm³ and 1.2 Gm./cm³
Specifications After Curing:
Density: 1.15 Gm./cm³ and 1.25 Gm./cm³
Flexural strength: 65 MPa
Flexural modulus: 2000 MPa
Degree of conversion: 70%